Click image to see more details
Product Info Summary
| SKU: | M00007-2 |
|---|---|
| Size: | 100 μl |
| Reactive Species: | Human |
| Host: | Rabbit |
| Application: | IP, IF, IHC, ICC, WB |
Customers Who Bought This Also Bought
Product info
Product Name
Anti-STAT3 Rabbit Monoclonal Antibody
SKU/Catalog Number
M00007-2
Size
100 μl
Form
Liquid
Description
Boster Bio Anti-STAT3 Rabbit Monoclonal Antibody catalog # M00007-2. Tested in WB, IHC, ICC/IF, IP applications. This antibody reacts with Human.
Storage & Handling
Store at -20°C for one year. For short term storage and frequent use, store at 4°C for up to one month. Avoid repeated freeze-thaw cycles.
Cite This Product
Anti-STAT3 Rabbit Monoclonal Antibody (Boster Biological Technology, Pleasanton CA, USA, Catalog # M00007-2)
Host
Rabbit
Contents
Rabbit IgG in phosphate buffered saline, pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol, 0.4-0.5mg/ml BSA.
Clonality
Monoclonal
Clone Number
GO-19
Isotype
Rabbit IgG
Immunogen
A synthesized peptide derived from human STAT3
*Blocking peptide can be purchased. Costs vary based on immunogen length. Contact us for pricing.
Reactive Species
M00007-2 is reactive to STAT3 in Human
Reconstitution
Restore with deionized water (or equivalent) for reconstitution volume of 1.0 mL
Observed Molecular Weight
54 kDa
Calculated molecular weight
88068 MW
Antibody Validation
Boster validates all antibodies on WB, IHC, ICC, Immunofluorescence, and ELISA with known positive control and negative samples to ensure specificity and high affinity, including thorough antibody incubations.
Application & Images
Applications
M00007-2 is guaranteed for IP, IF, IHC, ICC, WB Boster Guarantee
Assay Dilutions Recommendation
The recommendations below provide a starting point for assay optimization. The actual working concentration varies and should be decided by the user.
WB 1:500-1:2000
IHC 1:50-1:200
ICC/IF 1:50-1:200
IP 1:50
Positive Control
WB: A431 cell
IHC: mouse liver tissue
ICC/IF: Hela cell
Validation Images & Assay Conditions
Click image to see more details
Western blot analysis of STAT3 expression in A431 cell lysate.
Click image to see more details
Immunohistochemical analysis of paraffin-embedded mouse liver, using STAT3 Antibody.
Click image to see more details
Immunofluorescent analysis of Hela cells, using STAT3 Antibody .
Protein Target Info & Infographic
Gene/Protein Information For STAT3 (Source: Uniprot.org, NCBI)
Gene Name
STAT3
Full Name
Signal transducer and activator of transcription 3
Weight
88068 MW
Superfamily
transcription factor STAT family
Alternative Names
Signal transducer and activator of transcription 3;Acute-phase response factor;STAT3;APRF; STAT3 ADMIO, ADMIO1, APRF, HIES signal transducer and activator of transcription 3 signal transducer and activator of transcription 3|DNA-binding protein APRF|acute-phase response factor
*If product is indicated to react with multiple species, protein info is based on the gene entry specified above in "Species".For more info on STAT3, check out the STAT3 Infographic
We have 30,000+ of these available, one for each gene! Check them out.
In this infographic, you will see the following information for STAT3: database IDs, superfamily, protein function, synonyms, molecular weight, chromosomal locations, tissues of expression, subcellular locations, post-translational modifications, and related diseases, research areas & pathways. If you want to see more information included, or would like to contribute to it and be acknowledged, please contact [email protected].
Specific Publications For Anti-STAT3 Rabbit Monoclonal Antibody (M00007-2)
Hello CJ!
M00007-2 has been cited in 5 publications:
*The publications in this section are manually curated by our staff scientists. They may differ from Bioz's machine gathered results. Both are accurate. If you find a publication citing this product but is missing from this list, please let us know we will issue you a thank-you coupon.
Zhang Q,Duan HX,Li RL,Sun JY,Liu J,Peng W,Wu CJ,Gao YX. Inducing Apoptosis and Suppressing Inflammatory Reactions in Synovial Fibroblasts are Two Important Ways for Guizhi-Shaoyao-Zhimu Decoction Against Rheumatoid Arthritis. J Inflamm Res.2021 Jan 26;14:
Species: Human
Protective effects of Tongxinluo on cerebral ischemia/reperfusion injury related to Connexin 43/Calpain II/Bax/Caspase-3 pathway in rat
IL-6 Inhibits Starvation-induced Autophagy via the STAT3/Bcl-2 Signaling Pathway
Prognostic role of STAT3 in solid tumors: a systematic review and meta-analysis
Khan M, Li T, Ahmad Khan Mk, Rasul A, Nawaz F, Sun M, Zheng Y, Ma T. Biomed Res Int. 2013;2013:719858. Doi: 10.1155/2013/719858. Epub 2012 Dec 27. Alantolactone Induces Apoptosis In Hepg2 Cells Through Gsh Depletion, Inhibition Of Stat3 Activation...
Recommended Resources
Here are featured tools and databases that you might find useful.
- Boster's Pathways Library
- Protein Databases
- Bioscience Research Protocol Resources
- Data Processing & Analysis Software
- Photo Editing Software
- Scientific Literature Resources
- Research Paper Management Tools
- Molecular Biology Software
- Primer Design Tools
- Bioinformatics Tools
- Phylogenetic Tree Analysis
Customer Reviews
Have you used Anti-STAT3 Rabbit Monoclonal Antibody?
Submit a review and receive an Amazon gift card.
- $30 for a review with an image
0 Reviews For Anti-STAT3 Rabbit Monoclonal Antibody
Customer Q&As
Have a question?
Find answers in Q&As, reviews.
Can't find your answer?
Submit your question
17 Customer Q&As for Anti-STAT3 Rabbit Monoclonal Antibody
Question
Is this M00007-2 anti-STAT3 Rabbit Monoclonal antibody reactive to the isotypes of STAT3?
Verified Customer
Verified customer
Asked: 2020-02-04
Answer
The immunogen of M00007-2 anti-STAT3 Rabbit Monoclonal antibody is A synthesized peptide derived from human STAT3. Could you tell me which isotype you are interested in so I can help see if the immunogen is part of this isotype?
Boster Scientific Support
Answered: 2020-02-04
Question
We have tried in the past anti-STAT3 Rabbit Monoclonal antibody for WB on placenta a few years ago. I am using human, and We are going to use the antibody for IF next. My question regards examining placenta as well as erythroleukemia in our next experiment. Could you please give me some suggestion on which antibody would work the best for IF?
Verified Customer
Verified customer
Asked: 2020-01-06
Answer
I looked at the website and datasheets of our anti-STAT3 Rabbit Monoclonal antibody and it appears that M00007-2 has been validated on human in both WB and IF. Thus M00007-2 should work for your application. Our Boster satisfaction guarantee will cover this product for IF in human even if the specific tissue type has not been validated. We do have a comprehensive range of products for IF detection and you can check out our website bosterbio.com to find out more information about them.
Boster Scientific Support
Answered: 2020-01-06
Question
We have observed staining in human upper lobe of lung. Do you have any suggestions? Is anti-STAT3 Rabbit Monoclonal antibody supposed to stain upper lobe of lung positively?
Verified Customer
Verified customer
Asked: 2019-07-08
Answer
Based on literature upper lobe of lung does express STAT3. Based on Uniprot.org, STAT3 is expressed in upper lobe of lung, placenta, kidney pancreas, liver, cervix carcinoma, erythroleukemia, among other tissues. Regarding which tissues have STAT3 expression, here are a few articles citing expression in various tissues:
Cervix carcinoma, Pubmed ID: 18669648, 18691976, 20068231
Erythroleukemia, Pubmed ID: 23186163
Kidney, and Pancreas, Pubmed ID: 15489334
Liver, Pubmed ID: 7701321, 24275569
Placenta, Pubmed ID: 7512451
Boster Scientific Support
Answered: 2019-07-08
Question
Can you help my question with product M00007-2, anti-STAT3 Rabbit Monoclonal antibody. I was wondering if it would be possible to conjugate this antibody with biotin. I would need it to be without BSA or sodium azide. I am planning on using a buffer exchange of sodium azide with PBS only. Would there be problems for me to conjugate the antibody and store it in -20 degrees in small aliquots?
N. Anderson
Verified customer
Asked: 2019-05-14
Answer
We suggest not storing this antibody with PBS buffer only in -20 degrees. If you want to store it in -20 degrees it is best to add some cryoprotectant like glycerol. If you want carrier free M00007-2 anti-STAT3 Rabbit Monoclonal antibody, we can provide it to you in a special formula with trehalose and/or glycerol. These molecules will not interfere with conjugation chemistry and provide a good level of protection for the antibody from degradation. Please be sure to specify this in your purchase order.
Boster Scientific Support
Answered: 2019-05-14
Question
Does M00007-2 anti-STAT3 Rabbit Monoclonal antibody work on parafin embedded sections? If so, which fixation method do you recommend we use (PFA, paraformaldehyde, other)?
Verified Customer
Verified customer
Asked: 2019-05-10
Answer
As indicated on the product datasheet, M00007-2 anti-STAT3 Rabbit Monoclonal antibody as been validated on WB. It is best to use PFA for fixation because it has better tissue penetration ability. PFA needs to be prepared fresh before use. Long term stored PFA turns into formalin, as the PFA molecules congregate and become formalin.
Boster Scientific Support
Answered: 2019-05-10
Question
I am looking for to test anti-STAT3 Rabbit Monoclonal antibody M00007-2 on human liver for research purposes, then I may be interested in using anti-STAT3 Rabbit Monoclonal antibody M00007-2 for diagnostic purposes as well. Is the antibody suitable for diagnostic purposes?
Verified Customer
Verified customer
Asked: 2019-03-15
Answer
The products we sell, including anti-STAT3 Rabbit Monoclonal antibody M00007-2, are only intended for research use. They would not be suitable for use in diagnostic work. If you have the means to develop a product into diagnostic use, and are interested in collaborating with us and develop our product into an IVD product, please contact us for more discussions.
Boster Scientific Support
Answered: 2019-03-15
Question
I was wanting to use your anti-STAT3 Rabbit Monoclonal antibody for WB for human liver on frozen tissues, but I want to know if it has been validated for this particular application. Has this antibody been validated and is this antibody a good choice for human liver identification?
Verified Customer
Verified customer
Asked: 2018-11-20
Answer
You can see on the product datasheet, M00007-2 anti-STAT3 Rabbit Monoclonal antibody has been validated for IP, IF, WB on human tissues. We have an innovator award program that if you test this antibody and show it works in human liver in IHC-frozen, you can get your next antibody for free.
Boster Scientific Support
Answered: 2018-11-20
Question
Would anti-STAT3 Rabbit Monoclonal antibody M00007-2 work for WB with liver?
Verified Customer
Verified customer
Asked: 2018-08-23
Answer
According to the expression profile of liver, STAT3 is highly expressed in liver. So, it is likely that anti-STAT3 Rabbit Monoclonal antibody M00007-2 will work for WB with liver.
Boster Scientific Support
Answered: 2018-08-23
Question
Is a blocking peptide available for product anti-STAT3 Rabbit Monoclonal antibody (M00007-2)?
N. Carter
Verified customer
Asked: 2018-06-06
Answer
We do provide the blocking peptide for product anti-STAT3 Rabbit Monoclonal antibody (M00007-2). If you would like to place an order for it please contact [email protected] and make a special request.
Boster Scientific Support
Answered: 2018-06-06
Question
Is there a BSA free version of anti-STAT3 Rabbit Monoclonal antibody M00007-2 available?
Verified Customer
Verified customer
Asked: 2018-03-26
Answer
We appreciate your recent telephone inquiry. I can confirm that some lots of this anti-STAT3 Rabbit Monoclonal antibody M00007-2 are BSA free. For now, these lots are available and we can make a BSA free formula for you free of charge. It will take 3 extra days to prepare. If you require this antibody BSA free again in future, please do not hesitate to contact me and I will be pleased to check which lots we have in stock that are BSA free.
Boster Scientific Support
Answered: 2018-03-26
Question
Thank you for helping with my inquiry over the phone. Here are the WB image, lot number and protocol we used for liver using anti-STAT3 Rabbit Monoclonal antibody M00007-2. Let me know if you need anything else.
Verified Customer
Verified customer
Asked: 2017-10-03
Answer
Thanks for the data. You have provided everything we needed. Our lab team are working to resolve your inquiry as quickly as possible, and we appreciate your patience and understanding! Please let me know if there is anything you need in the meantime.
Boster Scientific Support
Answered: 2017-10-03
Question
See below the WB image, lot number and protocol we used for liver using anti-STAT3 Rabbit Monoclonal antibody M00007-2. Please let me know if you require anything else.
Verified Customer
Verified customer
Asked: 2017-06-09
Answer
Thank you very much for the data. Our lab team are working to resolve this as quickly as possible, and we appreciate your patience and understanding! You have provided everything we needed. Please let me know if there is anything you need in the meantime.
Boster Scientific Support
Answered: 2017-06-09
Question
Would anti-STAT3 Rabbit Monoclonal antibody M00007-2 work on monkey IP with upper lobe of lung?
J. Moore
Verified customer
Asked: 2016-08-17
Answer
Our lab technicians have not validated anti-STAT3 Rabbit Monoclonal antibody M00007-2 on monkey. You can run a BLAST between monkey and the immunogen sequence of anti-STAT3 Rabbit Monoclonal antibody M00007-2 to see if they may cross-react. If the sequence homology is close, then you can perform a pilot test. Keep in mind that since we have not validated monkey samples, this use of the antibody is not covered by our guarantee. However we have an innovator award program that if you test this antibody and show it works in monkey upper lobe of lung in IP, you can get your next antibody for free.
Boster Scientific Support
Answered: 2016-08-17
Question
We are currently using anti-STAT3 Rabbit Monoclonal antibody M00007-2 for human tissue, and we are happy with the IP results. The species of reactivity given in the datasheet says human. Is it true that the antibody can work on zebrafish tissues as well?
S. Mitchell
Verified customer
Asked: 2014-10-08
Answer
The anti-STAT3 Rabbit Monoclonal antibody (M00007-2) has not been validated for cross reactivity specifically with zebrafish tissues, though there is a good chance of cross reactivity. We have an innovator award program that if you test this antibody and show it works in zebrafish you can get your next antibody for free. Please contact me if I can help you with anything.
Boster Scientific Support
Answered: 2014-10-08
Question
I see that the anti-STAT3 Rabbit Monoclonal antibody M00007-2 works with WB, what is the protocol used to produce the result images on the product page?
K. Roberts
Verified customer
Asked: 2013-11-08
Answer
You can find protocols for WB on the "support/technical resources" section of our navigation menu. If you have any further questions, please send an email to [email protected]
Boster Scientific Support
Answered: 2013-11-08
Question
We need using your anti-STAT3 Rabbit Monoclonal antibody for interleukin-27-mediated signaling pathway studies. Has this antibody been tested with western blotting on a431 cell lysate? We would like to see some validation images before ordering.
M. Krishna
Verified customer
Asked: 2013-09-11
Answer
We appreciate your inquiry. This M00007-2 anti-STAT3 Rabbit Monoclonal antibody is validated on a431 cell lysate. It is guaranteed to work for IP, IF, WB in human. Our Boster guarantee will cover your intended experiment even if the sample type has not been be directly tested.
Boster Scientific Support
Answered: 2013-09-11
Question
My boss were well pleased with the WB result of your anti-STAT3 Rabbit Monoclonal antibody. However we have seen positive staining in cervix carcinoma cytoplasm. nucleus using this antibody. Is that expected? Could you tell me where is STAT3 supposed to be expressed?
M. Jha
Verified customer
Asked: 2013-04-03
Answer
From what I have seen in literature, cervix carcinoma does express STAT3. Generally STAT3 expresses in cytoplasm. nucleus. Regarding which tissues have STAT3 expression, here are a few articles citing expression in various tissues:
Cervix carcinoma, Pubmed ID: 18669648, 18691976, 20068231
Erythroleukemia, Pubmed ID: 23186163
Kidney, and Pancreas, Pubmed ID: 15489334
Liver, Pubmed ID: 7701321, 24275569
Placenta, Pubmed ID: 7512451
Boster Scientific Support
Answered: 2013-04-03
